How to Properly Measure for a Custom Suit or Shirt
How to Properly Measure for a Custom Suit or Shirt
Introduction
Getting the perfect fit for a custom suit or shirt can be transformative, boosting both appearance and confidence. However, achieving this perfect fit requires precise measurements. This guide will walk you through each necessary measurement, providing expert tips to ensure accuracy. From the chest circumference to understanding different body shapes and preferences, we will cover 18 essential criteria to help you measure with confidence. Whether you’re doing it for the first time or seeking to refine your skills, this comprehensive guide is designed to meet all your tailoring needs.
Some tips before you start
Before you start measuring, make sure you’re wearing light clothing or, ideally, clothing similar to the layer you typically wear beneath a suit. This will ensure the most accurate measurements possible. Use a flexible, non-stretchable tape measure to obtain the best results and maintain consistency. Write each measurement down immediately to avoid forgetfulness, as the process will typically involve several steps and figures.
It’s also highly advisable to have someone assist you in taking measurements. This will not only speed up the process but also improve accuracy, as second opinions and physical help can refine difficult-to-reach areas. Stand straight and be relaxed during measurements to avoid involuntary tightening that can lead to incorrect sizing.
A guide to taking measurements for a men’s suit
1/18 Chest circumference
Start by measuring the chest by wrapping the tape measure around the fullest part of the chest, usually across the nipples, making sure that the tape is level all the way around. Ensure that the person being measured is standing normally, with their arms by their sides, and is not holding a deep breath. This helps in capturing a natural and relaxed chest size.
It’s important to ensure that the tape measure is not too tight and shouldn’t pinch the skin. A finger should comfortably fit between the tape and the chest for some allowance. Chest circumference is crucial as it determines the overall fit of the upper garment, ensuring mobility and comfort.
2/18 Neck circumference
For neck circumference, wrap the tape measure around the neck, beginning at the height where the neck and shoulders meet. The tape should fit snugly but not tightly, as it should allow room for a comfortable collar fit. An additional half-inch is commonly added for comfort.
The neck measurement is particularly important when tailoring shirts. A perfect collar should be comfortable to wear yet snug enough to maintain a crisp and polished look around the neck.
3/18 Shoulder width
Shoulder width is measured from the outer edge of one shoulder to the other across the back. To get the most accurate measurement, ensure that the person being measured is standing straight. It’s helpful to start from the end of one shoulder, go across to the highest point of the other shoulder, and make sure the tape is flat across the back.
This measurement is key as it dictates how the suit jacket or shirt will sit on the shoulders, affecting both comfort and aesthetics. A well-measured shoulder width ensures the seams align perfectly with the natural shoulder line.
4/18 Arm length
Arm length is best measured from the top of the shoulder to the wrist bone, where the cuff of a shirt typically sits. Have the person bend their arm slightly to allow room for movement, which ensures optimum sleeve length when worn.
This measurement is important for both jackets and shirts to ensure the sleeves are of appropriate length – neither too short nor extending beyond the wrists – offering a polished finish.
5/18 Bicep circumference
To measure the circumference of the bicep, place the tape measure around the fullest part, typically halfway between the shoulder and elbow while the arm is relaxed. Make sure the tape is snug but not tight.
Bicep circumference ensures the sleeve isn’t too tight or too loose, providing ease of movement and a comfortable wear, which ultimately contributes to the overall fit and silhouette of the suit or shirt.
6/18 Wrist circumference
Wrap the tape measure around the wrist bone to take wrist measurements. This step ensures that the shirt cuffs are well-fitted, important for preventing sleeves from either being too tight or sliding down over the hands.
This measurement is crucial for shirt fittings, dictating the snugness of the cuff around the wrist. Making sure it allows for movement yet holds its position effectively is key to achieving the right fit.
7/18 Back length
The back length is measured starting from the base of the neck straight down the spine to the point where the client wants the jacket to end, usually around the top of the buttocks. Ensure the person is standing upright and relaxed during this process.
This measurement helps in crafting a jacket that sits properly on the body, neither too short nor excessively long, contributing to the desired overall silhouette of the garment.
8/18 Stomach circumference
Stomach circumference is measured by placing the tape measure around the widest part of the stomach area. It’s important to include some allowance to ensure comfort in various positions, rather than pulling the tape tight.
This measurement is vital for achieving a comfortable fit that allows for natural body movements without causing the suit or shirt to feel restrictive or strained.
9/18 Waistline
The waistline measurement involves wrapping the tape measure around the natural waist or slightly above the hip bone, where most pants actually sit. Be sure the tape measure is parallel to the floor and snug but not restricting.
This measurement ensures that trousers or suits will stay in place comfortably when worn. It is essential for both aesthetic appeal and practicality when sitting or moving.
10/18 Hip circumference
To measure the hip circumference, place the measuring tape around the fullest part of the hips and bottom. Stand with feet together to get the most accurate reading possible.
Hip circumference informs the fit for pants, ensuring that the fabric drapes nicely without pulling or feeling too loose. A well-measured hip circumference is a fundamental part of tailored trousers and suits.
11/18 Inside leg
Inside leg, or inseam, is the distance from the crotch to the bottom of the ankle, guiding how trousers are tailored in terms of length. Have the person stand straight and ensure the tape is close to the leg for an accurate measure.
This measurement is important for ensuring that the trousers fit perfectly from the leg opening to the break, achieving a tailored and polished finish.
12/18 Thigh
The thigh is measured by wrapping the tape around the widest part of the upper leg, typically a few inches below the crotch. Make sure there’s enough room for some allowance as thigh muscles expand during movement.
This ensures comfort and flexibility in movement, aligning with the seat and hip fit, crucial for well-fitting trousers.
13/18 Shoulder type
Examining shoulder type involves noting whether there’s a slope to the shoulders and if one is higher than the other. This detail is important for tailoring as it affects the fit of both jackets and shirts.
Identify whether the shoulders are sloped, square, or uneven to accommodate these variances in tailored clothing, aimed at providing a balanced and symmetrical look.
14/18 Chest type
Understanding chest type includes considering whether the chest is muscular, average, or slim. This will guide chest measurements and how much ease is needed in the fit.
Recognizing the chest type ensures the right amount of fabric and construction is used to flatter the physique appropriately, providing both a visually appealing and comfortable fit.
15/18 Stomach type
Stomach types vary and may be flat, round, or somewhere in between. Consider these factors to ensure the stomach area of a jacket or shirt can accommodate comfortably while maintaining style.
This helps in customizing fits that neither cling too tightly to curves nor create excess space, offering an optimal balanced look.
16/18 Back type
Back type should account for physical posture which might be straight, round, or hollow. Choose fits and constructions to suit these differences for a more fitted appearance.
Recognizing back type aids in avoiding undesirable bunching or pulling at the back, enhancing the overall line of the suit or shirt.
17/18 Rear type
The rear type is crucial to determine, especially for trousers. Consider if there is fullness or flatness as these will affect how trousers hang, altering adjustments in cut and drape.
Taking note of this assists in achieving a fit that complements the body’s natural shape, ensuring a good balance between style and functionality.
18/18 Fit
Ultimately, fit types vary from a slim to a classic look. Deciding on a tailored fit is a matter of personal preference and comfort, needing to balance attractiveness and movability.
The desired fit will guide the decision on allowances made in measurements for both suits and shirts to marry function with personal style flourishingly.
Perfect fit.
Perfect fitting is a marriage of accurate measurements and understanding personal body types. By adhering to guides and understanding body nuances, achieving a bespoke garment becomes a functional reality. Customize in a manner that supports elegance and supports everyday movements effortlessly.
A well-fitted suit or shirt reflects elegance while providing the wearer with comfort and confidence. Be meticulous and strive for precision at every step in measuring to turn any customized clothing endeavor into a resounding success.
Final thoughts
| Measurement | Details |
|---|---|
| Chest circumference | Fullest part of the chest, arms relaxed |
| Neck circumference | Neck base, add allowance for comfort |
| Shoulder width | Outer edge to outer edge across the back |
| Arm length | From shoulder to wrist, arm slightly bent |
| Bicep circumference | Fullest part of bicep, arm relaxed |
| Wrist circumference | Around the wrist bone, snug fit |
| Back length | Base of neck to desired jacket end point |
| Stomach circumference | Widest part around the stomach |
| Waistline | Around the natural waist |
| Hip circumference | Fullest part of hips and bottom |
| Inside leg | Crotch to bottom ankle |
| Thigh | Widest part of the upper leg |
| Shoulder type | Assessing slope and evenness |
| Chest type | Muscular, average, or slim |
| Stomach type | Flat, round, or intermediate |
| Back type | Straight, round, hollow assessments |
| Rear type | Assess fullness or flatness |
| Fit | Choosing between slim, classic fit preferences |


